⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Florence County › Niagara (54151)

Niagara, WI (54151): well depth, water level & drilling cost

✓ 942 WI DNR records · Florence County

122 ftmedian well depth
54 ft–250 fttypical depth range
24 ftmedian static water level
8 gpmmedian yield (563 tests)

Pull every recorded well near a Niagara (54151) address — $49

How deep are wells in and around Niagara (54151), Wisconsin?

The median drilled well depth in and around Niagara (54151) is 122 ft, based on 595 wells with recorded depths in the state WI DNR database. Half fall between 54 ft and 250 ft; 90% are shallower than 304 ft.

How much does it cost to drill a well in and around Niagara (54151)?

Applying published per-foot rates to the local median depth of 122 ft: drilling and casing alone typically runs $3,050–$7,930; a complete system including pump, pressure tank, and hookup typically runs $7,320–$12,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Niagara (54151)?

The median static water level is 24 ft below ground surface (middle half of wells: 15 ft–40 ft), from 582 measurements.

Drilled depth distribution

0–50 ft 124 50–100 ft 146 100–150 ft 64 150–200 ft 31 200–300 ft 118 300–400 ft 98 400–600 ft 14 600+ ft 0
Looking at a specific property in Niagara (54151)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Niagara (54151)

Free. Goes to licensed drillers working Florence County.

Part of Florence County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.