⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marinette County › Pembine (54156)

Pembine, WI (54156): well depth, water level & drilling cost

✓ 1,026 WI DNR records · Marinette County

97 ftmedian well depth
63 ft–242 fttypical depth range
30 ftmedian static water level
8 gpmmedian yield (791 tests)

Pull every recorded well near a Pembine (54156) address — $49

How deep are wells in and around Pembine (54156), Wisconsin?

The median drilled well depth in and around Pembine (54156) is 97 ft, based on 809 wells with recorded depths in the state WI DNR database. Half fall between 63 ft and 242 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Pembine (54156)?

Applying published per-foot rates to the local median depth of 97 ft: drilling and casing alone typically runs $2,425–$6,305; a complete system including pump, pressure tank, and hookup typically runs $5,820–$9,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pembine (54156)?

The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–43 ft), from 804 measurements.

Drilled depth distribution

0–50 ft 92 50–100 ft 316 100–150 ft 105 150–200 ft 28 200–300 ft 181 300–400 ft 78 400–600 ft 9 600+ ft 0
Looking at a specific property in Pembine (54156)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pembine (54156)

Free. Goes to licensed drillers working Marinette County.

Part of Marinette County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.