⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Calumet County › Potter (54160)

Potter, WI (54160): well depth, water level & drilling cost

✓ 318 WI DNR records · Calumet County

140 ftmedian well depth
101 ft–184 fttypical depth range
30 ftmedian static water level
20 gpmmedian yield (183 tests)

Pull every recorded well near a Potter (54160) address — $49

How deep are wells in and around Potter (54160), Wisconsin?

The median drilled well depth in and around Potter (54160) is 140 ft, based on 187 wells with recorded depths in the state WI DNR database. Half fall between 101 ft and 184 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Potter (54160)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Potter (54160)?

The median static water level is 30 ft below ground surface (middle half of wells: 16 ft–40 ft), from 186 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 30 100–150 ft 74 150–200 ft 41 200–300 ft 35 300–400 ft 5 400–600 ft 1 600+ ft 0
Looking at a specific property in Potter (54160)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Potter (54160)

Free. Goes to licensed drillers working Calumet County.

Part of Calumet County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.