⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Calumet County › Sherwood (54169)

Sherwood, WI (54169): well depth, water level & drilling cost

✓ 581 WI DNR records · Calumet County

360 ftmedian well depth
200 ft–409 fttypical depth range
140 ftmedian static water level
20 gpmmedian yield (313 tests)

Pull every recorded well near a Sherwood (54169) address — $49

How deep are wells in and around Sherwood (54169), Wisconsin?

The median drilled well depth in and around Sherwood (54169) is 360 ft, based on 320 wells with recorded depths in the state WI DNR database. Half fall between 200 ft and 409 ft; 90% are shallower than 506 ft.

How much does it cost to drill a well in and around Sherwood (54169)?

Applying published per-foot rates to the local median depth of 360 ft: drilling and casing alone typically runs $9,000–$23,400; a complete system including pump, pressure tank, and hookup typically runs $21,600–$36,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sherwood (54169)?

The median static water level is 140 ft below ground surface (middle half of wells: 50 ft–180 ft), from 314 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 38 100–150 ft 27 150–200 ft 15 200–300 ft 35 300–400 ft 103 400–600 ft 93 600+ ft 9
Looking at a specific property in Sherwood (54169)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sherwood (54169)

Free. Goes to licensed drillers working Calumet County.

Part of Calumet County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.