Wisconsin Well Data › Brown County › Wrightstown (54180)
Wrightstown, WI (54180): well depth, water level & drilling cost
✓ 1,295 WI DNR records · Brown County
Pull every recorded well near a Wrightstown (54180) address — $49
How deep are wells in and around Wrightstown (54180), Wisconsin?
The median drilled well depth in and around Wrightstown (54180) is 320 ft, based on 985 wells with recorded depths in the state WI DNR database. Half fall between 221 ft and 402 ft; 90% are shallower than 498 ft.
How much does it cost to drill a well in and around Wrightstown (54180)?
Applying published per-foot rates to the local median depth of 320 ft: drilling and casing alone typically runs $8,000–$20,800; a complete system including pump, pressure tank, and hookup typically runs $19,200–$32,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Wrightstown (54180)?
The median static water level is 100 ft below ground surface (middle half of wells: 70 ft–120 ft), from 984 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Brown County.
Part of Brown County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.