⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Kewaunee County › Algoma (54201)

Algoma, WI (54201): well depth, water level & drilling cost

✓ 588 WI DNR records · Kewaunee County

160 ftmedian well depth
123 ft–203 fttypical depth range
20 ftmedian static water level
20 gpmmedian yield (276 tests)

Pull every recorded well near a Algoma (54201) address — $49

How deep are wells in and around Algoma (54201), Wisconsin?

The median drilled well depth in and around Algoma (54201) is 160 ft, based on 286 wells with recorded depths in the state WI DNR database. Half fall between 123 ft and 203 ft; 90% are shallower than 262 ft.

How much does it cost to drill a well in and around Algoma (54201)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Algoma (54201)?

The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–30 ft), from 279 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 19 100–150 ft 119 150–200 ft 65 200–300 ft 63 300–400 ft 16 400–600 ft 4 600+ ft 0
Looking at a specific property in Algoma (54201)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Algoma (54201)

Free. Goes to licensed drillers working Kewaunee County.

Part of Kewaunee County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.