⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Manitowoc County › Maribel (54227)

Maribel, WI (54227): well depth, water level & drilling cost

✓ 560 WI DNR records · Manitowoc County

160 ftmedian well depth
121 ft–203 fttypical depth range
50 ftmedian static water level
20 gpmmedian yield (323 tests)

Pull every recorded well near a Maribel (54227) address — $49

How deep are wells in and around Maribel (54227), Wisconsin?

The median drilled well depth in and around Maribel (54227) is 160 ft, based on 331 wells with recorded depths in the state WI DNR database. Half fall between 121 ft and 203 ft; 90% are shallower than 243 ft.

How much does it cost to drill a well in and around Maribel (54227)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Maribel (54227)?

The median static water level is 50 ft below ground surface (middle half of wells: 25 ft–67 ft), from 327 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 18 100–150 ft 145 150–200 ft 62 200–300 ft 81 300–400 ft 21 400–600 ft 3 600+ ft 0
Looking at a specific property in Maribel (54227)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Maribel (54227)

Free. Goes to licensed drillers working Manitowoc County.

Part of Manitowoc County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.