Wisconsin Well Data › Brown County › New Franken (54229)
New Franken, WI (54229): well depth, water level & drilling cost
✓ 2,023 WI DNR records · Brown County
Pull every recorded well near a New Franken (54229) address — $49
How deep are wells in and around New Franken (54229), Wisconsin?
The median drilled well depth in and around New Franken (54229) is 143 ft, based on 1,273 wells with recorded depths in the state WI DNR database. Half fall between 102 ft and 240 ft; 90% are shallower than 642 ft.
How much does it cost to drill a well in and around New Franken (54229)?
Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around New Franken (54229)?
The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–60 ft), from 1,268 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Brown County.
Part of Brown County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.