Wisconsin Well Data › Kewaunee County › Tisch Mills (54240)
Tisch Mills, WI (54240): well depth, water level & drilling cost
✓ 639 WI DNR records · Kewaunee County
Pull every recorded well near a Tisch Mills (54240) address — $49
How deep are wells in and around Tisch Mills (54240), Wisconsin?
The median drilled well depth in and around Tisch Mills (54240) is 123 ft, based on 395 wells with recorded depths in the state WI DNR database. Half fall between 103 ft and 163 ft; 90% are shallower than 220 ft.
How much does it cost to drill a well in and around Tisch Mills (54240)?
Applying published per-foot rates to the local median depth of 123 ft: drilling and casing alone typically runs $3,075–$7,995; a complete system including pump, pressure tank, and hookup typically runs $7,380–$12,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Tisch Mills (54240)?
The median static water level is 23 ft below ground surface (middle half of wells: 15 ft–44 ft), from 394 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kewaunee County.
Part of Kewaunee County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.