Wisconsin Well Data › Manitowoc County › Two Rivers (54241)
Two Rivers, WI (54241): well depth, water level & drilling cost
✓ 608 WI DNR records · Manitowoc County
Pull every recorded well near a Two Rivers (54241) address — $49
How deep are wells in and around Two Rivers (54241), Wisconsin?
The median drilled well depth in and around Two Rivers (54241) is 171 ft, based on 311 wells with recorded depths in the state WI DNR database. Half fall between 123 ft and 242 ft; 90% are shallower than 303 ft.
How much does it cost to drill a well in and around Two Rivers (54241)?
Applying published per-foot rates to the local median depth of 171 ft: drilling and casing alone typically runs $4,275–$11,115; a complete system including pump, pressure tank, and hookup typically runs $10,260–$17,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Two Rivers (54241)?
The median static water level is 30 ft below ground surface (middle half of wells: 15 ft–50 ft), from 302 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Manitowoc County.
Part of Manitowoc County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.