⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Brown County › Green Bay (54311)

Green Bay, WI (54311): well depth, water level & drilling cost

✓ 889 WI DNR records · Brown County

109 ftmedian well depth
97 ft–143 fttypical depth range
20 ftmedian static water level
25 gpmmedian yield (432 tests)

Pull every recorded well near a Green Bay (54311) address — $49

How deep are wells in and around Green Bay (54311), Wisconsin?

The median drilled well depth in and around Green Bay (54311) is 109 ft, based on 452 wells with recorded depths in the state WI DNR database. Half fall between 97 ft and 143 ft; 90% are shallower than 197 ft.

How much does it cost to drill a well in and around Green Bay (54311)?

Applying published per-foot rates to the local median depth of 109 ft: drilling and casing alone typically runs $2,725–$7,085; a complete system including pump, pressure tank, and hookup typically runs $6,540–$10,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Green Bay (54311)?

The median static water level is 20 ft below ground surface (middle half of wells: 11 ft–30 ft), from 439 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 114 100–150 ft 234 150–200 ft 59 200–300 ft 21 300–400 ft 3 400–600 ft 5 600+ ft 14
Looking at a specific property in Green Bay (54311)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Green Bay (54311)

Free. Goes to licensed drillers working Brown County.

Part of Brown County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.