Wisconsin Well Data › Marathon County › Marshfield (54404)
Marshfield, WI (54404): well depth, water level & drilling cost
✓ 840 WI DNR records · Marathon County
Pull every recorded well near a Marshfield (54404) address — $49
How deep are wells in and around Marshfield (54404), Wisconsin?
The median drilled well depth in and around Marshfield (54404) is 130 ft, based on 532 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 180 ft; 90% are shallower than 220 ft.
How much does it cost to drill a well in and around Marshfield (54404)?
Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Marshfield (54404)?
The median static water level is 16 ft below ground surface (middle half of wells: 10 ft–22 ft), from 525 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Marathon County.
Part of Marathon County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.