Wisconsin Well Data › Marathon County › Abbotsford (54405)
Abbotsford, WI (54405): well depth, water level & drilling cost
✓ 561 WI DNR records · Marathon County
Pull every recorded well near a Abbotsford (54405) address — $49
How deep are wells in and around Abbotsford (54405), Wisconsin?
The median drilled well depth in and around Abbotsford (54405) is 140 ft, based on 297 wells with recorded depths in the state WI DNR database. Half fall between 80 ft and 180 ft; 90% are shallower than 240 ft.
How much does it cost to drill a well in and around Abbotsford (54405)?
Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Abbotsford (54405)?
The median static water level is 14 ft below ground surface (middle half of wells: 8 ft–20 ft), from 293 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Marathon County.
Part of Marathon County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.