⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marathon County › Aniwa (54408)

Aniwa, WI (54408): well depth, water level & drilling cost

✓ 955 WI DNR records · Marathon County

200 ftmedian well depth
120 ft–245 fttypical depth range
14 ftmedian static water level
5 gpmmedian yield (510 tests)

Pull every recorded well near a Aniwa (54408) address — $49

How deep are wells in and around Aniwa (54408), Wisconsin?

The median drilled well depth in and around Aniwa (54408) is 200 ft, based on 529 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 245 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Aniwa (54408)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Aniwa (54408)?

The median static water level is 14 ft below ground surface (middle half of wells: 10 ft–21 ft), from 518 measurements.

Drilled depth distribution

0–50 ft 31 50–100 ft 59 100–150 ft 87 150–200 ft 53 200–300 ft 229 300–400 ft 66 400–600 ft 4 600+ ft 0
Looking at a specific property in Aniwa (54408)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Aniwa (54408)

Free. Goes to licensed drillers working Marathon County.

Part of Marathon County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.