⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Wood County › Auburndale (54412)

Auburndale, WI (54412): well depth, water level & drilling cost

✓ 546 WI DNR records · Wood County

160 ftmedian well depth
101 ft–202 fttypical depth range
12 ftmedian static water level
6 gpmmedian yield (301 tests)

Pull every recorded well near a Auburndale (54412) address — $49

How deep are wells in and around Auburndale (54412), Wisconsin?

The median drilled well depth in and around Auburndale (54412) is 160 ft, based on 302 wells with recorded depths in the state WI DNR database. Half fall between 101 ft and 202 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Auburndale (54412)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Auburndale (54412)?

The median static water level is 12 ft below ground surface (middle half of wells: 9 ft–15 ft), from 302 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 51 100–150 ft 84 150–200 ft 59 200–300 ft 98 300–400 ft 9 400–600 ft 0 600+ ft 0
Looking at a specific property in Auburndale (54412)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Auburndale (54412)

Free. Goes to licensed drillers working Wood County.

Part of Wood County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.