⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Wood County › Babcock (54413)

Babcock, WI (54413): well depth, water level & drilling cost

✓ 202 WI DNR records · Wood County

58 ftmedian well depth
40 ft–82 fttypical depth range
7 ftmedian static water level
15 gpmmedian yield (156 tests)

Pull every recorded well near a Babcock (54413) address — $49

How deep are wells in and around Babcock (54413), Wisconsin?

The median drilled well depth in and around Babcock (54413) is 58 ft, based on 167 wells with recorded depths in the state WI DNR database. Half fall between 40 ft and 82 ft; 90% are shallower than 166 ft.

How much does it cost to drill a well in and around Babcock (54413)?

Applying published per-foot rates to the local median depth of 58 ft: drilling and casing alone typically runs $1,450–$3,770; a complete system including pump, pressure tank, and hookup typically runs $3,480–$5,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Babcock (54413)?

The median static water level is 7 ft below ground surface (middle half of wells: 6 ft–10 ft), from 162 measurements.

Drilled depth distribution

0–50 ft 71 50–100 ft 62 100–150 ft 14 150–200 ft 7 200–300 ft 11 300–400 ft 1 400–600 ft 1 600+ ft 0
Looking at a specific property in Babcock (54413)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Babcock (54413)

Free. Goes to licensed drillers working Wood County.

Part of Wood County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.