⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Wood County › Blenker (54415)

Blenker, WI (54415): well depth, water level & drilling cost

✓ 326 WI DNR records · Wood County

150 ftmedian well depth
100 ft–202 fttypical depth range
12 ftmedian static water level
5 gpmmedian yield (184 tests)

Pull every recorded well near a Blenker (54415) address — $49

How deep are wells in and around Blenker (54415), Wisconsin?

The median drilled well depth in and around Blenker (54415) is 150 ft, based on 187 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 202 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Blenker (54415)?

Applying published per-foot rates to the local median depth of 150 ft: drilling and casing alone typically runs $3,750–$9,750; a complete system including pump, pressure tank, and hookup typically runs $9,000–$15,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Blenker (54415)?

The median static water level is 12 ft below ground surface (middle half of wells: 8 ft–16 ft), from 185 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 40 100–150 ft 53 150–200 ft 20 200–300 ft 64 300–400 ft 10 400–600 ft 0 600+ ft 0
Looking at a specific property in Blenker (54415)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Blenker (54415)

Free. Goes to licensed drillers working Wood County.

Part of Wood County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.