⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Clark County › Chili (54420)

Chili, WI (54420): well depth, water level & drilling cost

✓ 763 WI DNR records · Clark County

80 ftmedian well depth
58 ft–123 fttypical depth range
17 ftmedian static water level
10 gpmmedian yield (452 tests)

Pull every recorded well near a Chili (54420) address — $49

How deep are wells in and around Chili (54420), Wisconsin?

The median drilled well depth in and around Chili (54420) is 80 ft, based on 483 wells with recorded depths in the state WI DNR database. Half fall between 58 ft and 123 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Chili (54420)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Chili (54420)?

The median static water level is 17 ft below ground surface (middle half of wells: 10 ft–27 ft), from 467 measurements.

Drilled depth distribution

0–50 ft 60 50–100 ft 220 100–150 ft 107 150–200 ft 41 200–300 ft 55 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Chili (54420)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Chili (54420)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.