⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Clark County › Curtiss (54422)

Curtiss, WI (54422): well depth, water level & drilling cost

✓ 395 WI DNR records · Clark County

89 ftmedian well depth
59 ft–141 fttypical depth range
19 ftmedian static water level
8 gpmmedian yield (241 tests)

Pull every recorded well near a Curtiss (54422) address — $49

How deep are wells in and around Curtiss (54422), Wisconsin?

The median drilled well depth in and around Curtiss (54422) is 89 ft, based on 243 wells with recorded depths in the state WI DNR database. Half fall between 59 ft and 141 ft; 90% are shallower than 190 ft.

How much does it cost to drill a well in and around Curtiss (54422)?

Applying published per-foot rates to the local median depth of 89 ft: drilling and casing alone typically runs $2,225–$5,785; a complete system including pump, pressure tank, and hookup typically runs $5,340–$8,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Curtiss (54422)?

The median static water level is 19 ft below ground surface (middle half of wells: 11 ft–29 ft), from 243 measurements.

Drilled depth distribution

0–50 ft 27 50–100 ft 104 100–150 ft 55 150–200 ft 33 200–300 ft 21 300–400 ft 0 400–600 ft 0 600+ ft 3
Looking at a specific property in Curtiss (54422)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Curtiss (54422)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.