⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marathon County › Edgar (54426)

Edgar, WI (54426): well depth, water level & drilling cost

✓ 890 WI DNR records · Marathon County

160 ftmedian well depth
100 ft–200 fttypical depth range
14 ftmedian static water level
6 gpmmedian yield (456 tests)

Pull every recorded well near a Edgar (54426) address — $49

How deep are wells in and around Edgar (54426), Wisconsin?

The median drilled well depth in and around Edgar (54426) is 160 ft, based on 503 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 200 ft; 90% are shallower than 250 ft.

How much does it cost to drill a well in and around Edgar (54426)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Edgar (54426)?

The median static water level is 14 ft below ground surface (middle half of wells: 10 ft–21 ft), from 469 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 95 100–150 ft 122 150–200 ft 88 200–300 ft 155 300–400 ft 31 400–600 ft 1 600+ ft 0
Looking at a specific property in Edgar (54426)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Edgar (54426)

Free. Goes to licensed drillers working Marathon County.

Part of Marathon County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.