⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Taylor County › Gilman (54433)

Gilman, WI (54433): well depth, water level & drilling cost

✓ 495 WI DNR records · Taylor County

100 ftmedian well depth
55 ft–146 fttypical depth range
15 ftmedian static water level
6 gpmmedian yield (274 tests)

Pull every recorded well near a Gilman (54433) address — $49

How deep are wells in and around Gilman (54433), Wisconsin?

The median drilled well depth in and around Gilman (54433) is 100 ft, based on 280 wells with recorded depths in the state WI DNR database. Half fall between 55 ft and 146 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Gilman (54433)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Gilman (54433)?

The median static water level is 15 ft below ground surface (middle half of wells: 10 ft–21 ft), from 279 measurements.

Drilled depth distribution

0–50 ft 57 50–100 ft 81 100–150 ft 72 150–200 ft 41 200–300 ft 23 300–400 ft 5 400–600 ft 0 600+ ft 1
Looking at a specific property in Gilman (54433)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Gilman (54433)

Free. Goes to licensed drillers working Taylor County.

Part of Taylor County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.