⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Clark County › Greenwood (54437)

Greenwood, WI (54437): well depth, water level & drilling cost

✓ 644 WI DNR records · Clark County

95 ftmedian well depth
70 ft–163 fttypical depth range
27 ftmedian static water level
10 gpmmedian yield (350 tests)

Pull every recorded well near a Greenwood (54437) address — $49

How deep are wells in and around Greenwood (54437), Wisconsin?

The median drilled well depth in and around Greenwood (54437) is 95 ft, based on 349 wells with recorded depths in the state WI DNR database. Half fall between 70 ft and 163 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Greenwood (54437)?

Applying published per-foot rates to the local median depth of 95 ft: drilling and casing alone typically runs $2,375–$6,175; a complete system including pump, pressure tank, and hookup typically runs $5,700–$9,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Greenwood (54437)?

The median static water level is 27 ft below ground surface (middle half of wells: 18 ft–38 ft), from 352 measurements.

Drilled depth distribution

0–50 ft 14 50–100 ft 161 100–150 ft 67 150–200 ft 29 200–300 ft 64 300–400 ft 13 400–600 ft 1 600+ ft 0
Looking at a specific property in Greenwood (54437)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Greenwood (54437)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.