⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Taylor County › Hannibal (54439)

Hannibal, WI (54439): well depth, water level & drilling cost

✓ 303 WI DNR records · Taylor County

100 ftmedian well depth
59 ft–162 fttypical depth range
12 ftmedian static water level
6 gpmmedian yield (186 tests)

Pull every recorded well near a Hannibal (54439) address — $49

How deep are wells in and around Hannibal (54439), Wisconsin?

The median drilled well depth in and around Hannibal (54439) is 100 ft, based on 190 wells with recorded depths in the state WI DNR database. Half fall between 59 ft and 162 ft; 90% are shallower than 205 ft.

How much does it cost to drill a well in and around Hannibal (54439)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hannibal (54439)?

The median static water level is 12 ft below ground surface (middle half of wells: 7 ft–24 ft), from 189 measurements.

Drilled depth distribution

0–50 ft 35 50–100 ft 56 100–150 ft 38 150–200 ft 32 200–300 ft 27 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Hannibal (54439)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hannibal (54439)

Free. Goes to licensed drillers working Taylor County.

Part of Taylor County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.