⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Wood County › Hewitt (54441)

Hewitt, WI (54441): well depth, water level & drilling cost

✓ 875 WI DNR records · Wood County

140 ftmedian well depth
100 ft–200 fttypical depth range
13 ftmedian static water level
5 gpmmedian yield (548 tests)

Pull every recorded well near a Hewitt (54441) address — $49

How deep are wells in and around Hewitt (54441), Wisconsin?

The median drilled well depth in and around Hewitt (54441) is 140 ft, based on 562 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 200 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Hewitt (54441)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hewitt (54441)?

The median static water level is 13 ft below ground surface (middle half of wells: 10 ft–18 ft), from 552 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 108 100–150 ft 189 150–200 ft 92 200–300 ft 156 300–400 ft 10 400–600 ft 2 600+ ft 0
Looking at a specific property in Hewitt (54441)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hewitt (54441)

Free. Goes to licensed drillers working Wood County.

Part of Wood County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.