⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Lincoln County › Irma (54442)

Irma, WI (54442): well depth, water level & drilling cost

✓ 1,015 WI DNR records · Lincoln County

82 ftmedian well depth
59 ft–125 fttypical depth range
30 ftmedian static water level
10 gpmmedian yield (991 tests)

Pull every recorded well near a Irma (54442) address — $49

How deep are wells in and around Irma (54442), Wisconsin?

The median drilled well depth in and around Irma (54442) is 82 ft, based on 1,010 wells with recorded depths in the state WI DNR database. Half fall between 59 ft and 125 ft; 90% are shallower than 181 ft.

How much does it cost to drill a well in and around Irma (54442)?

Applying published per-foot rates to the local median depth of 82 ft: drilling and casing alone typically runs $2,050–$5,330; a complete system including pump, pressure tank, and hookup typically runs $4,920–$8,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Irma (54442)?

The median static water level is 30 ft below ground surface (middle half of wells: 16 ft–45 ft), from 1,007 measurements.

Drilled depth distribution

0–50 ft 163 50–100 ft 441 100–150 ft 240 150–200 ft 83 200–300 ft 72 300–400 ft 11 400–600 ft 0 600+ ft 0
Looking at a specific property in Irma (54442)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Irma (54442)

Free. Goes to licensed drillers working Lincoln County.

Part of Lincoln County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.