⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Wood County › Marshfield (54449)

Marshfield, WI (54449): well depth, water level & drilling cost

✓ 851 WI DNR records · Wood County

140 ftmedian well depth
100 ft–198 fttypical depth range
15 ftmedian static water level
7 gpmmedian yield (522 tests)

Pull every recorded well near a Marshfield (54449) address — $49

How deep are wells in and around Marshfield (54449), Wisconsin?

The median drilled well depth in and around Marshfield (54449) is 140 ft, based on 554 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 198 ft; 90% are shallower than 222 ft.

How much does it cost to drill a well in and around Marshfield (54449)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Marshfield (54449)?

The median static water level is 15 ft below ground surface (middle half of wells: 10 ft–22 ft), from 531 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 120 100–150 ft 190 150–200 ft 95 200–300 ft 134 300–400 ft 5 400–600 ft 0 600+ ft 0
Looking at a specific property in Marshfield (54449)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Marshfield (54449)

Free. Goes to licensed drillers working Wood County.

Part of Wood County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.