⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Lincoln County › Merrill (54452)

Merrill, WI (54452): well depth, water level & drilling cost

✓ 3,232 WI DNR records · Lincoln County

80 ftmedian well depth
52 ft–139 fttypical depth range
25 ftmedian static water level
10 gpmmedian yield (3,017 tests)

Pull every recorded well near a Merrill (54452) address — $49

How deep are wells in and around Merrill (54452), Wisconsin?

The median drilled well depth in and around Merrill (54452) is 80 ft, based on 3,072 wells with recorded depths in the state WI DNR database. Half fall between 52 ft and 139 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Merrill (54452)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Merrill (54452)?

The median static water level is 25 ft below ground surface (middle half of wells: 16 ft–35 ft), from 3,049 measurements.

Drilled depth distribution

0–50 ft 673 50–100 ft 1,158 100–150 ft 603 150–200 ft 240 200–300 ft 322 300–400 ft 65 400–600 ft 11 600+ ft 0
Looking at a specific property in Merrill (54452)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Merrill (54452)

Free. Goes to licensed drillers working Lincoln County.

Part of Lincoln County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.