⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Wood County › Milladore (54454)

Milladore, WI (54454): well depth, water level & drilling cost

✓ 411 WI DNR records · Wood County

180 ftmedian well depth
120 ft–220 fttypical depth range
10 ftmedian static water level
6 gpmmedian yield (197 tests)

Pull every recorded well near a Milladore (54454) address — $49

How deep are wells in and around Milladore (54454), Wisconsin?

The median drilled well depth in and around Milladore (54454) is 180 ft, based on 213 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 220 ft; 90% are shallower than 258 ft.

How much does it cost to drill a well in and around Milladore (54454)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Milladore (54454)?

The median static water level is 10 ft below ground surface (middle half of wells: 7 ft–15 ft), from 211 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 23 100–150 ft 54 150–200 ft 33 200–300 ft 85 300–400 ft 8 400–600 ft 5 600+ ft 0
Looking at a specific property in Milladore (54454)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Milladore (54454)

Free. Goes to licensed drillers working Wood County.

Part of Wood County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.