Wisconsin Well Data › Portage County › Nelsonville (54458)
Nelsonville, WI (54458): well depth, water level & drilling cost
✓ 732 WI DNR records · Portage County
Pull every recorded well near a Nelsonville (54458) address — $49
How deep are wells in and around Nelsonville (54458), Wisconsin?
The median drilled well depth in and around Nelsonville (54458) is 100 ft, based on 571 wells with recorded depths in the state WI DNR database. Half fall between 77 ft and 122 ft; 90% are shallower than 142 ft.
How much does it cost to drill a well in and around Nelsonville (54458)?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Nelsonville (54458)?
The median static water level is 52 ft below ground surface (middle half of wells: 32 ft–68 ft), from 522 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Portage County.
Part of Portage County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.