⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Clark County › Owen (54460)

Owen, WI (54460): well depth, water level & drilling cost

✓ 354 WI DNR records · Clark County

82 ftmedian well depth
60 ft–140 fttypical depth range
17 ftmedian static water level
8 gpmmedian yield (229 tests)

Pull every recorded well near a Owen (54460) address — $49

How deep are wells in and around Owen (54460), Wisconsin?

The median drilled well depth in and around Owen (54460) is 82 ft, based on 231 wells with recorded depths in the state WI DNR database. Half fall between 60 ft and 140 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Owen (54460)?

Applying published per-foot rates to the local median depth of 82 ft: drilling and casing alone typically runs $2,050–$5,330; a complete system including pump, pressure tank, and hookup typically runs $4,920–$8,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Owen (54460)?

The median static water level is 17 ft below ground surface (middle half of wells: 11 ft–25 ft), from 230 measurements.

Drilled depth distribution

0–50 ft 23 50–100 ft 105 100–150 ft 52 150–200 ft 22 200–300 ft 22 300–400 ft 5 400–600 ft 2 600+ ft 0
Looking at a specific property in Owen (54460)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Owen (54460)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.