⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Portage County › Plover (54467)

Plover, WI (54467): well depth, water level & drilling cost

✓ 1,575 WI DNR records · Portage County

48 ftmedian well depth
35 ft–70 fttypical depth range
20 ftmedian static water level
16 gpmmedian yield (630 tests)

Pull every recorded well near a Plover (54467) address — $49

How deep are wells in and around Plover (54467), Wisconsin?

The median drilled well depth in and around Plover (54467) is 48 ft, based on 1,072 wells with recorded depths in the state WI DNR database. Half fall between 35 ft and 70 ft; 90% are shallower than 106 ft.

How much does it cost to drill a well in and around Plover (54467)?

Applying published per-foot rates to the local median depth of 48 ft: drilling and casing alone typically runs $1,200–$3,120; a complete system including pump, pressure tank, and hookup typically runs $2,880–$4,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Plover (54467)?

The median static water level is 20 ft below ground surface (middle half of wells: 14 ft–30 ft), from 905 measurements.

Drilled depth distribution

0–50 ft 562 50–100 ft 381 100–150 ft 75 150–200 ft 12 200–300 ft 41 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Plover (54467)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Plover (54467)

Free. Goes to licensed drillers working Portage County.

Part of Portage County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.