⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Wood County › Port Edwards (54469)

Port Edwards, WI (54469): well depth, water level & drilling cost

✓ 655 WI DNR records · Wood County

49 ftmedian well depth
42 ft–57 fttypical depth range
26 ftmedian static water level
15 gpmmedian yield (521 tests)

Pull every recorded well near a Port Edwards (54469) address — $49

How deep are wells in and around Port Edwards (54469), Wisconsin?

The median drilled well depth in and around Port Edwards (54469) is 49 ft, based on 552 wells with recorded depths in the state WI DNR database. Half fall between 42 ft and 57 ft; 90% are shallower than 82 ft.

How much does it cost to drill a well in and around Port Edwards (54469)?

Applying published per-foot rates to the local median depth of 49 ft: drilling and casing alone typically runs $1,225–$3,185; a complete system including pump, pressure tank, and hookup typically runs $2,940–$4,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Port Edwards (54469)?

The median static water level is 26 ft below ground surface (middle half of wells: 15 ft–34 ft), from 547 measurements.

Drilled depth distribution

0–50 ft 283 50–100 ft 230 100–150 ft 22 150–200 ft 9 200–300 ft 8 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Port Edwards (54469)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Port Edwards (54469)

Free. Goes to licensed drillers working Wood County.

Part of Wood County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.