⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Taylor County › Rib Lake (54470)

Rib Lake, WI (54470): well depth, water level & drilling cost

✓ 842 WI DNR records · Taylor County

80 ftmedian well depth
54 ft–120 fttypical depth range
19 ftmedian static water level
7 gpmmedian yield (524 tests)

Pull every recorded well near a Rib Lake (54470) address — $49

How deep are wells in and around Rib Lake (54470), Wisconsin?

The median drilled well depth in and around Rib Lake (54470) is 80 ft, based on 527 wells with recorded depths in the state WI DNR database. Half fall between 54 ft and 120 ft; 90% are shallower than 163 ft.

How much does it cost to drill a well in and around Rib Lake (54470)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Rib Lake (54470)?

The median static water level is 19 ft below ground surface (middle half of wells: 10 ft–32 ft), from 526 measurements.

Drilled depth distribution

0–50 ft 114 50–100 ft 219 100–150 ft 119 150–200 ft 40 200–300 ft 33 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Rib Lake (54470)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Rib Lake (54470)

Free. Goes to licensed drillers working Taylor County.

Part of Taylor County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.