⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marathon County › Ringle (54471)

Ringle, WI (54471): well depth, water level & drilling cost

✓ 835 WI DNR records · Marathon County

166 ftmedian well depth
80 ft–232 fttypical depth range
15 ftmedian static water level
8 gpmmedian yield (502 tests)

Pull every recorded well near a Ringle (54471) address — $49

How deep are wells in and around Ringle (54471), Wisconsin?

The median drilled well depth in and around Ringle (54471) is 166 ft, based on 515 wells with recorded depths in the state WI DNR database. Half fall between 80 ft and 232 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Ringle (54471)?

Applying published per-foot rates to the local median depth of 166 ft: drilling and casing alone typically runs $4,150–$10,790; a complete system including pump, pressure tank, and hookup typically runs $9,960–$16,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Ringle (54471)?

The median static water level is 15 ft below ground surface (middle half of wells: 10 ft–23 ft), from 514 measurements.

Drilled depth distribution

0–50 ft 78 50–100 ft 77 100–150 ft 80 150–200 ft 53 200–300 ft 168 300–400 ft 56 400–600 ft 3 600+ ft 0
Looking at a specific property in Ringle (54471)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Ringle (54471)

Free. Goes to licensed drillers working Marathon County.

Part of Marathon County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.