⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Wood County › Rudolph (54475)

Rudolph, WI (54475): well depth, water level & drilling cost

✓ 808 WI DNR records · Wood County

180 ftmedian well depth
100 ft–220 fttypical depth range
9 ftmedian static water level
6 gpmmedian yield (514 tests)

Pull every recorded well near a Rudolph (54475) address — $49

How deep are wells in and around Rudolph (54475), Wisconsin?

The median drilled well depth in and around Rudolph (54475) is 180 ft, based on 537 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 220 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Rudolph (54475)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Rudolph (54475)?

The median static water level is 9 ft below ground surface (middle half of wells: 6 ft–12 ft), from 532 measurements.

Drilled depth distribution

0–50 ft 31 50–100 ft 71 100–150 ft 134 150–200 ft 63 200–300 ft 228 300–400 ft 7 400–600 ft 3 600+ ft 0
Looking at a specific property in Rudolph (54475)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Rudolph (54475)

Free. Goes to licensed drillers working Wood County.

Part of Wood County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.