⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Marathon County › Spencer (54479)

Spencer, WI (54479): well depth, water level & drilling cost

✓ 804 WI DNR records · Marathon County

100 ftmedian well depth
65 ft–160 fttypical depth range
14 ftmedian static water level
9 gpmmedian yield (529 tests)

Pull every recorded well near a Spencer (54479) address — $49

How deep are wells in and around Spencer (54479), Wisconsin?

The median drilled well depth in and around Spencer (54479) is 100 ft, based on 556 wells with recorded depths in the state WI DNR database. Half fall between 65 ft and 160 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Spencer (54479)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Spencer (54479)?

The median static water level is 14 ft below ground surface (middle half of wells: 8 ft–20 ft), from 529 measurements.

Drilled depth distribution

0–50 ft 25 50–100 ft 244 100–150 ft 131 150–200 ft 79 200–300 ft 74 300–400 ft 3 400–600 ft 0 600+ ft 0
Looking at a specific property in Spencer (54479)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Spencer (54479)

Free. Goes to licensed drillers working Marathon County.

Part of Marathon County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.