Wisconsin Well Data › Portage County › Stevens Point (54481)
Stevens Point, WI (54481): well depth, water level & drilling cost
✓ 816 WI DNR records · Portage County
Pull every recorded well near a Stevens Point (54481) address — $49
How deep are wells in and around Stevens Point (54481), Wisconsin?
The median drilled well depth in and around Stevens Point (54481) is 56 ft, based on 598 wells with recorded depths in the state WI DNR database. Half fall between 45 ft and 195 ft; 90% are shallower than 220 ft.
How much does it cost to drill a well in and around Stevens Point (54481)?
Applying published per-foot rates to the local median depth of 56 ft: drilling and casing alone typically runs $1,400–$3,640; a complete system including pump, pressure tank, and hookup typically runs $3,360–$5,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Stevens Point (54481)?
The median static water level is 19 ft below ground surface (middle half of wells: 8 ft–28 ft), from 586 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Portage County.
Part of Portage County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.