⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Clark County › Unity (54488)

Unity, WI (54488): well depth, water level & drilling cost

✓ 641 WI DNR records · Clark County

100 ftmedian well depth
70 ft–142 fttypical depth range
17 ftmedian static water level
8 gpmmedian yield (315 tests)

Pull every recorded well near a Unity (54488) address — $49

How deep are wells in and around Unity (54488), Wisconsin?

The median drilled well depth in and around Unity (54488) is 100 ft, based on 325 wells with recorded depths in the state WI DNR database. Half fall between 70 ft and 142 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Unity (54488)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Unity (54488)?

The median static water level is 17 ft below ground surface (middle half of wells: 10 ft–27 ft), from 321 measurements.

Drilled depth distribution

0–50 ft 32 50–100 ft 117 100–150 ft 101 150–200 ft 32 200–300 ft 37 300–400 ft 4 400–600 ft 2 600+ ft 0
Looking at a specific property in Unity (54488)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Unity (54488)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.