⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Clark County › Withee (54498)

Withee, WI (54498): well depth, water level & drilling cost

✓ 497 WI DNR records · Clark County

93 ftmedian well depth
58 ft–146 fttypical depth range
18 ftmedian static water level
7 gpmmedian yield (301 tests)

Pull every recorded well near a Withee (54498) address — $49

How deep are wells in and around Withee (54498), Wisconsin?

The median drilled well depth in and around Withee (54498) is 93 ft, based on 306 wells with recorded depths in the state WI DNR database. Half fall between 58 ft and 146 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Withee (54498)?

Applying published per-foot rates to the local median depth of 93 ft: drilling and casing alone typically runs $2,325–$6,045; a complete system including pump, pressure tank, and hookup typically runs $5,580–$9,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Withee (54498)?

The median static water level is 18 ft below ground surface (middle half of wells: 11 ft–25 ft), from 303 measurements.

Drilled depth distribution

0–50 ft 44 50–100 ft 113 100–150 ft 73 150–200 ft 40 200–300 ft 32 300–400 ft 2 400–600 ft 2 600+ ft 0
Looking at a specific property in Withee (54498)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Withee (54498)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.