Wisconsin Well Data › Oneida County › Rhinelander (54501)
Rhinelander, WI (54501): well depth, water level & drilling cost
✓ 4,574 WI DNR records · Oneida County
Pull every recorded well near a Rhinelander (54501) address — $49
How deep are wells in and around Rhinelander (54501), Wisconsin?
The median drilled well depth in and around Rhinelander (54501) is 59 ft, based on 3,041 wells with recorded depths in the state WI DNR database. Half fall between 40 ft and 98 ft; 90% are shallower than 240 ft.
How much does it cost to drill a well in and around Rhinelander (54501)?
Applying published per-foot rates to the local median depth of 58 ft: drilling and casing alone typically runs $1,450–$3,770; a complete system including pump, pressure tank, and hookup typically runs $3,480–$5,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Rhinelander (54501)?
The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–30 ft), from 3,077 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Oneida County.
Part of Oneida County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.