⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Ashland County › Clam Lake (54517)

Clam Lake, WI (54517): well depth, water level & drilling cost

✓ 462 WI DNR records · Ashland County

73 ftmedian well depth
46 ft–102 fttypical depth range
19 ftmedian static water level
10 gpmmedian yield (284 tests)

Pull every recorded well near a Clam Lake (54517) address — $49

How deep are wells in and around Clam Lake (54517), Wisconsin?

The median drilled well depth in and around Clam Lake (54517) is 73 ft, based on 283 wells with recorded depths in the state WI DNR database. Half fall between 46 ft and 102 ft; 90% are shallower than 144 ft.

How much does it cost to drill a well in and around Clam Lake (54517)?

Applying published per-foot rates to the local median depth of 73 ft: drilling and casing alone typically runs $1,825–$4,745; a complete system including pump, pressure tank, and hookup typically runs $4,380–$7,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Clam Lake (54517)?

The median static water level is 19 ft below ground surface (middle half of wells: 13 ft–27 ft), from 284 measurements.

Drilled depth distribution

0–50 ft 80 50–100 ft 123 100–150 ft 52 150–200 ft 12 200–300 ft 12 300–400 ft 4 400–600 ft 0 600+ ft 0
Looking at a specific property in Clam Lake (54517)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Clam Lake (54517)

Free. Goes to licensed drillers working Ashland County.

Part of Ashland County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.