⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Vilas County › Conover (54519)

Conover, WI (54519): well depth, water level & drilling cost

✓ 1,079 WI DNR records · Vilas County

60 ftmedian well depth
41 ft–86 fttypical depth range
20 ftmedian static water level
15 gpmmedian yield (897 tests)

Pull every recorded well near a Conover (54519) address — $49

How deep are wells in and around Conover (54519), Wisconsin?

The median drilled well depth in and around Conover (54519) is 60 ft, based on 906 wells with recorded depths in the state WI DNR database. Half fall between 41 ft and 86 ft; 90% are shallower than 120 ft.

How much does it cost to drill a well in and around Conover (54519)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Conover (54519)?

The median static water level is 20 ft below ground surface (middle half of wells: 11 ft–31 ft), from 911 measurements.

Drilled depth distribution

0–50 ft 304 50–100 ft 443 100–150 ft 127 150–200 ft 23 200–300 ft 7 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Conover (54519)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Conover (54519)

Free. Goes to licensed drillers working Vilas County.

Part of Vilas County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.