⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iron County › Gile (54525)

Gile, WI (54525): well depth, water level & drilling cost

✓ 133 WI DNR records · Iron County

220 ftmedian well depth
198 ft–240 fttypical depth range
16 ftmedian static water level
3 gpmmedian yield (92 tests)

Pull every recorded well near a Gile (54525) address — $49

How deep are wells in and around Gile (54525), Wisconsin?

The median drilled well depth in and around Gile (54525) is 220 ft, based on 98 wells with recorded depths in the state WI DNR database. Half fall between 198 ft and 240 ft; 90% are shallower than 258 ft.

How much does it cost to drill a well in and around Gile (54525)?

Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Gile (54525)?

The median static water level is 16 ft below ground surface (middle half of wells: 10 ft–20 ft), from 97 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 7 100–150 ft 3 150–200 ft 12 200–300 ft 68 300–400 ft 2 400–600 ft 2 600+ ft 0
Looking at a specific property in Gile (54525)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Gile (54525)

Free. Goes to licensed drillers working Iron County.

Part of Iron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.