⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Oneida County › Harshaw (54529)

Harshaw, WI (54529): well depth, water level & drilling cost

✓ 1,860 WI DNR records · Oneida County

60 ftmedian well depth
46 ft–84 fttypical depth range
28 ftmedian static water level
15 gpmmedian yield (1,469 tests)

Pull every recorded well near a Harshaw (54529) address — $49

How deep are wells in and around Harshaw (54529), Wisconsin?

The median drilled well depth in and around Harshaw (54529) is 60 ft, based on 1,466 wells with recorded depths in the state WI DNR database. Half fall between 46 ft and 84 ft; 90% are shallower than 120 ft.

How much does it cost to drill a well in and around Harshaw (54529)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Harshaw (54529)?

The median static water level is 28 ft below ground surface (middle half of wells: 18 ft–40 ft), from 1,515 measurements.

Drilled depth distribution

0–50 ft 399 50–100 ft 795 100–150 ft 198 150–200 ft 45 200–300 ft 21 300–400 ft 5 400–600 ft 3 600+ ft 0
Looking at a specific property in Harshaw (54529)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Harshaw (54529)

Free. Goes to licensed drillers working Oneida County.

Part of Oneida County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.