⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Rusk County › Hawkins (54530)

Hawkins, WI (54530): well depth, water level & drilling cost

✓ 284 WI DNR records · Rusk County

67 ftmedian well depth
50 ft–98 fttypical depth range
20 ftmedian static water level
8 gpmmedian yield (206 tests)

Pull every recorded well near a Hawkins (54530) address — $49

How deep are wells in and around Hawkins (54530), Wisconsin?

The median drilled well depth in and around Hawkins (54530) is 67 ft, based on 210 wells with recorded depths in the state WI DNR database. Half fall between 50 ft and 98 ft; 90% are shallower than 140 ft.

How much does it cost to drill a well in and around Hawkins (54530)?

Applying published per-foot rates to the local median depth of 67 ft: drilling and casing alone typically runs $1,675–$4,355; a complete system including pump, pressure tank, and hookup typically runs $4,020–$6,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hawkins (54530)?

The median static water level is 20 ft below ground surface (middle half of wells: 13 ft–30 ft), from 207 measurements.

Drilled depth distribution

0–50 ft 52 50–100 ft 107 100–150 ft 31 150–200 ft 10 200–300 ft 10 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Hawkins (54530)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hawkins (54530)

Free. Goes to licensed drillers working Rusk County.

Part of Rusk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.