⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Oneida County › Hazelhurst (54531)

Hazelhurst, WI (54531): well depth, water level & drilling cost

✓ 1,612 WI DNR records · Oneida County

70 ftmedian well depth
56 ft–98 fttypical depth range
30 ftmedian static water level
15 gpmmedian yield (1,151 tests)

Pull every recorded well near a Hazelhurst (54531) address — $49

How deep are wells in and around Hazelhurst (54531), Wisconsin?

The median drilled well depth in and around Hazelhurst (54531) is 70 ft, based on 1,159 wells with recorded depths in the state WI DNR database. Half fall between 56 ft and 98 ft; 90% are shallower than 141 ft.

How much does it cost to drill a well in and around Hazelhurst (54531)?

Applying published per-foot rates to the local median depth of 62 ft: drilling and casing alone typically runs $1,550–$4,030; a complete system including pump, pressure tank, and hookup typically runs $3,720–$6,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hazelhurst (54531)?

The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–40 ft), from 1,274 measurements.

Drilled depth distribution

0–50 ft 199 50–100 ft 681 100–150 ft 180 150–200 ft 67 200–300 ft 25 300–400 ft 7 400–600 ft 0 600+ ft 0
Looking at a specific property in Hazelhurst (54531)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hazelhurst (54531)

Free. Goes to licensed drillers working Oneida County.

Part of Oneida County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.