⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iron County › Iron Belt (54536)

Iron Belt, WI (54536): well depth, water level & drilling cost

✓ 62 WI DNR records · Iron County

90 ftmedian well depth
67 ft–198 fttypical depth range
14 ftmedian static water level
10 gpmmedian yield (41 tests)

Pull every recorded well near a Iron Belt (54536) address — $49

How deep are wells in and around Iron Belt (54536), Wisconsin?

The median drilled well depth in and around Iron Belt (54536) is 90 ft, based on 41 wells with recorded depths in the state WI DNR database. Half fall between 67 ft and 198 ft; 90% are shallower than 242 ft.

How much does it cost to drill a well in and around Iron Belt (54536)?

Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Iron Belt (54536)?

The median static water level is 14 ft below ground surface (middle half of wells: 7 ft–21 ft), from 41 measurements.

Drilled depth distribution

0–50 ft 6 50–100 ft 18 100–150 ft 4 150–200 ft 3 200–300 ft 9 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Iron Belt (54536)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Iron Belt (54536)

Free. Goes to licensed drillers working Iron County.

Part of Iron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.