Wisconsin Well Data › Oneida County › Lake Tomahawk (54539)
Lake Tomahawk, WI (54539): well depth, water level & drilling cost
✓ 1,663 WI DNR records · Oneida County
Pull every recorded well near a Lake Tomahawk (54539) address — $49
How deep are wells in and around Lake Tomahawk (54539), Wisconsin?
The median drilled well depth in and around Lake Tomahawk (54539) is 66 ft, based on 1,128 wells with recorded depths in the state WI DNR database. Half fall between 53 ft and 84 ft; 90% are shallower than 110 ft.
How much does it cost to drill a well in and around Lake Tomahawk (54539)?
Applying published per-foot rates to the local median depth of 62 ft: drilling and casing alone typically runs $1,550–$4,030; a complete system including pump, pressure tank, and hookup typically runs $3,720–$6,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Lake Tomahawk (54539)?
The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–44 ft), from 1,204 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Oneida County.
Part of Oneida County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.