Wisconsin Well Data › Oneida County › Mc Naughton (54543)
Mc Naughton, WI (54543): well depth, water level & drilling cost
✓ 1,350 WI DNR records · Oneida County
Pull every recorded well near a Mc Naughton (54543) address — $49
How deep are wells in and around Mc Naughton (54543), Wisconsin?
The median drilled well depth in and around Mc Naughton (54543) is 60 ft, based on 1,023 wells with recorded depths in the state WI DNR database. Half fall between 43 ft and 80 ft; 90% are shallower than 114 ft.
How much does it cost to drill a well in and around Mc Naughton (54543)?
Applying published per-foot rates to the local median depth of 59 ft: drilling and casing alone typically runs $1,475–$3,835; a complete system including pump, pressure tank, and hookup typically runs $3,540–$5,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Mc Naughton (54543)?
The median static water level is 26 ft below ground surface (middle half of wells: 15 ft–39 ft), from 1,049 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Oneida County.
Part of Oneida County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.