⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Ashland County › Mellen (54546)

Mellen, WI (54546): well depth, water level & drilling cost

✓ 260 WI DNR records · Ashland County

139 ftmedian well depth
57 ft–230 fttypical depth range
18 ftmedian static water level
7 gpmmedian yield (164 tests)

Pull every recorded well near a Mellen (54546) address — $49

How deep are wells in and around Mellen (54546), Wisconsin?

The median drilled well depth in and around Mellen (54546) is 139 ft, based on 170 wells with recorded depths in the state WI DNR database. Half fall between 57 ft and 230 ft; 90% are shallower than 260 ft.

How much does it cost to drill a well in and around Mellen (54546)?

Applying published per-foot rates to the local median depth of 139 ft: drilling and casing alone typically runs $3,475–$9,035; a complete system including pump, pressure tank, and hookup typically runs $8,340–$13,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mellen (54546)?

The median static water level is 18 ft below ground surface (middle half of wells: 12 ft–25 ft), from 170 measurements.

Drilled depth distribution

0–50 ft 30 50–100 ft 44 100–150 ft 15 150–200 ft 14 200–300 ft 55 300–400 ft 10 400–600 ft 2 600+ ft 0
Looking at a specific property in Mellen (54546)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mellen (54546)

Free. Goes to licensed drillers working Ashland County.

Part of Ashland County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.